+--- FILE "/tmp/all.log" -----------------------
| WTware PRO 4.5.24 supervisor.
| KERNEL: BIOS EBDA/lowmem at: 0009fc00/0009f800
| KERNEL: Linux version 2.6.28 (root@compiler) (gcc version 4.2.1) #1 PREEMPT Mon Jan 26 17:43:35 UTC 2009
| KERNEL: KERNEL supported cpus:
| KERNEL:   Intel GenuineIntel
| KERNEL:   AMD AuthenticAMD
| KERNEL:   NSC Geode by NSC
| KERNEL:   Cyrix CyrixInstead
| KERNEL:   Centaur CentaurHauls
| KERNEL:   Transmeta GenuineTMx86
| KERNEL:   Transmeta TransmetaCPU
| KERNEL:   UMC UMC UMC UMC
| KERNEL: BIOS-provided physical RAM map:
| KERNEL:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
| KERNEL:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
| KERNEL:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
| KERNEL:  BIOS-e820: 0000000000100000 - 000000000dfd0000 (usable)
| KERNEL:  BIOS-e820: 000000000dfd0000 - 000000000dff0c00 (reserved)
| KERNEL:  BIOS-e820: 000000000dff0c00 - 000000000dffc000 (ACPI NVS)
| KERNEL:  BIOS-e820: 000000000dffc000 - 000000000e000000 (reserved)
| KERNEL: DMI 2.3 present.
| KERNEL: last_pfn = 0xdfd0 max_arch_pfn = 0x100000
| KERNEL: kernel direct mapping tables up to dfd0000 @ 7000-d000
| KERNEL: RAMDISK: 0ddfa000 - 0dfb0000
| KERNEL: ACPI: RSDP 000F7840, 0014 (r0 COMPAQ)
| KERNEL: ACPI: RSDT 0DFF0C84, 002C (r1 COMPAQ CPQ005A  30080620 CPQ         1)
| KERNEL: ACPI: FACP 0DFF0C00, 0084 (r2 COMPAQ CPQ005A         2 CPQ         1)
| KERNEL: ACPI: DSDT 0DFF0CB0, 607E (r1 COMPAQ  EVON800    10000 MSFT  100000E)
| KERNEL: ACPI: FACS 0DFFBE80, 0040
| KERNEL: ACPI: SSDT 0DFF6D2E, 0265 (r1 COMPAQ  CPQGysr     1001 MSFT  100000E)
| KERNEL: 223MB LOWMEM available.
| KERNEL:   mapped low ram: 0 - 0dfd0000
| KERNEL:   low ram: 00000000 - 0dfd0000
| KERNEL:   bootmap 00001000 - 00002bfc
| KERNEL: (7 early reservations) ==> bootmem [0000000000 - 000dfd0000]
| KERNEL:   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
| KERNEL:   #1 [0000100000 - 000036c678]    TEXT DATA BSS ==> [0000100000 - 000036c678]
| KERNEL:   #2 [000ddfa000 - 000dfb0000]          RAMDISK ==> [000ddfa000 - 000dfb0000]
| KERNEL:   #3 [000036d000 - 000036f000]    INIT_PG_TABLE ==> [000036d000 - 000036f000]
| KERNEL:   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
| KERNEL:   #5 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
| KERNEL:   #6 [0000001000 - 0000003000]          BOOTMAP ==> [0000001000 - 0000003000]
| KERNEL: Zone PFN ranges:
| KERNEL:   DMA      0x00000000 -> 0x00001000
| KERNEL:   Normal   0x00001000 -> 0x0000dfd0
| KERNEL: Movable zone start PFN for each node
| KERNEL: early_node_map[2] active PFN ranges
| KERNEL:     0: 0x00000000 -> 0x0000009f
| KERNEL:     0: 0x00000100 -> 0x0000dfd0
| KERNEL: On node 0 totalpages: 57199
| KERNEL: free_area_init_node: node 0, pgdat c02fb4e0, node_mem_map c1000000
| KERNEL:   DMA zone: 32 pages used for memmap
| KERNEL:   DMA zone: 0 pages reserved
| KERNEL:   DMA zone: 3967 pages, LIFO batch:0
| KERNEL:   Normal zone: 416 pages used for memmap
| KERNEL:   Normal zone: 52784 pages, LIFO batch:15
| KERNEL:   Movable zone: 0 pages used for memmap
| KERNEL: ACPI: PM-Timer IO Port: 0x1008
| KERNEL: Local APIC disabled by BIOS -- you can enable it with "lapic"
| KERNEL: Allocating PCI resources starting at 10000000 (gap: e000000:f2000000)
| KERNEL: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 56751
| KERNEL: Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| KERNEL: Enabling fast FPU save and restore... done.
| KERNEL: Enabling unmasked SIMD FPU exception support... done.
| KERNEL: Initializing CPU#0
| KERNEL: PID hash table entries: 1024 (order: 10, 4096 bytes)
| KERNEL: Fast TSC calibration using PIT
| KERNEL: Detected 1393.264 MHz processor.
| KERNEL: Console: colour VGA+ 80x25
| KERNEL: console [tty0] enabled
| KERNEL: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
| KERNEL: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
| KERNEL: Memory: 222132k/229184k available (1513k kernel code, 6384k reserved, 535k data, 248k init, 0k highmem)
| KERNEL: virtual kernel memory layout:
| KERNEL:     fixmap  : 0xfffab000 - 0xfffff000   ( 336 kB)
| KERNEL:     vmalloc : 0xce7d0000 - 0xfffa9000   ( 791 MB)
| KERNEL:     lowmem  : 0xc0000000 - 0xcdfd0000   ( 223 MB)
| KERNEL:       .init : 0xc0304000 - 0xc0342000   ( 248 kB)
| KERNEL:       .data : 0xc027a688 - 0xc03004e8   ( 535 kB)
| KERNEL:       .text : 0xc0100000 - 0xc027a688   (1513 kB)
| KERNEL: Checking if this processor honours the WP bit even in supervisor mode...Ok.
| KERNEL: Calibrating delay loop (skipped), value calculated using timer frequency.. 2786.52 BogoMIPS (lpj=13932640)
| KERNEL: Mount-cache hash table entries: 512
| KERNEL: CPU: L1 I cache: 32K, L1 D cache: 32K
| KERNEL: CPU: L2 cache: 1024K
| KERNEL: CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
| KERNEL: Checking 'hlt' instruction... OK.
| KERNEL: Freeing SMP alternatives: 0k freed
| KERNEL: ACPI: Core revision 20080926
| KERNEL: ACPI: setting ELCR to 0200 (from 0c20)
| KERNEL: net_namespace: 288 bytes
| KERNEL: NET: Registered protocol family 16
| KERNEL: ACPI: bus type pci registered
| KERNEL: PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=1
| KERNEL: PCI: Using configuration type 1 for base access
| KERNEL: ACPI: EC: Look up EC in DSDT
| KERNEL: ACPI: EC: non-query interrupt received, switching to interrupt mode
| KERNEL: ACPI: Interpreter enabled
| KERNEL: ACPI: (supports S0 S5)
| KERNEL: ACPI: Using PIC for interrupt routing
| KERNEL: ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
| KERNEL: ACPI: EC: driver started in interrupt mode
| KERNEL: ACPI: PCI Root Bridge [C044] (0000:00)
| KERNEL: pci 0000:00:00.0: reg 10 32bit mmio: [0x9c000000-0x9fffffff]
| KERNEL: pci 0000:00:00.0: reg 14 32bit mmio: [0x98480000-0x98480fff]
| KERNEL: pci 0000:00:06.0: reg 10 io port: [0x3000-0x30ff]
| KERNEL: pci 0000:00:06.0: reg 14 32bit mmio: [0x98100000-0x98100fff]
| KERNEL: pci 0000:00:06.0: supports D1 D2
| KERNEL: pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
| KERNEL: pci 0000:00:06.0: PME# disabled
| KERNEL: pci 0000:00:08.0: reg 10 32bit mmio: [0x98180000-0x98180fff]
| KERNEL: pci 0000:00:08.0: reg 14 io port: [0x3400-0x34ff]
| KERNEL: pci 0000:00:08.0: PME# supported from D3hot D3cold
| KERNEL: pci 0000:00:08.0: PME# disabled
| KERNEL: pci 0000:00:09.0: reg 10 32bit mmio: [0x98080000-0x9808ffff]
| KERNEL: pci 0000:00:0b.0: reg 10 32bit mmio: [0x98200000-0x98200fff]
| KERNEL: pci 0000:00:0b.0: supports D1 D2
| KERNEL: pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
| KERNEL: pci 0000:00:0b.0: PME# disabled
| KERNEL: pci 0000:00:0b.2: reg 10 32bit mmio: [0x98280000-0x98280fff]
| KERNEL: pci 0000:00:0b.2: supports D1 D2
| KERNEL: pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
| KERNEL: pci 0000:00:0b.2: PME# disabled
| KERNEL: pci 0000:00:10.0: reg 20 io port: [0x3800-0x380f]
| KERNEL: pci 0000:00:11.0: quirk: region 1000-103f claimed by ali7101 ACPI
| KERNEL: pci 0000:00:11.0: quirk: region 1100-111f claimed by ali7101 SMB
| KERNEL: pci 0000:00:12.0: reg 10 32bit mmio: [0x98300000-0x98300fff]
| KERNEL: pci 0000:00:12.0: supports D1 D2
| KERNEL: pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
| KERNEL: pci 0000:00:12.0: PME# disabled
| KERNEL: pci 0000:00:12.1: reg 10 32bit mmio: [0x98380000-0x98380fff]
| KERNEL: pci 0000:00:12.1: supports D1 D2
| KERNEL: pci 0000:00:12.1: PME# supported from D0 D1 D2 D3hot D3cold
| KERNEL: pci 0000:00:12.1: PME# disabled
| KERNEL: pci 0000:00:12.2: reg 10 32bit mmio: [0x98400000-0x984000ff]
| KERNEL: pci 0000:00:12.2: supports D1 D2
| KERNEL: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
| KERNEL: pci 0000:00:12.2: PME# disabled
| KERNEL: pci 0000:00:13.0: reg 10 64bit mmio: [0x98000000-0x9800ffff]
| KERNEL: pci 0000:00:13.0: reg 30 32bit mmio: [0x000000-0x00ffff]
| KERNEL: pci 0000:00:13.0: PME# supported from D3hot D3cold
| KERNEL: pci 0000:00:13.0: PME# disabled
| KERNEL: pci 0000:01:05.0: reg 10 32bit mmio: [0x94000000-0x97ffffff]
| KERNEL: pci 0000:01:05.0: reg 14 io port: [0x2000-0x20ff]
| KERNEL: pci 0000:01:05.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
| KERNEL: pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
| KERNEL: pci 0000:01:05.0: supports D1 D2
| KERNEL: pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
| KERNEL: pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0x900fffff]
| KERNEL: pci 0000:00:01.0: bridge 32bit mmio pref: [0x94000000-0x97ffffff]
| KERNEL: bus 00 -> node 0
| KERNEL: ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
| KERNEL: ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
| KERNEL: ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11)
| KERNEL: ACPI: PCI Interrupt Link [C0C5] (IRQs 5 *10 11)
| KERNEL: ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10 *11)
| KERNEL: ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10 11) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [C0C8] (IRQs 5 *10 11)
| KERNEL: ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10 11)
| KERNEL: ACPI: PCI Interrupt Link [C0CA] (IRQs 5 10 *11)
| KERNEL: ACPI: PCI Interrupt Link [C0CB] (IRQs 5 10 *11)
| KERNEL: ACPI: Power Resource [C17A] (on)
| KERNEL: ACPI: Power Resource [C1F2] (off)
| KERNEL: ACPI: Power Resource [C1F3] (off)
| KERNEL: ACPI: Power Resource [C1F4] (off)
| KERNEL: ACPI: Power Resource [C1F5] (off)
| KERNEL: PCI: Using ACPI for IRQ routing
| KERNEL: pnp: PnP ACPI init
| KERNEL: ACPI: bus type pnp registered
| KERNEL: pnp: PnP ACPI: found 11 devices
| KERNEL: ACPI: ACPI bus type pnp unregistered
| KERNEL: system 00:00: iomem range 0x0-0x9ffff could not be reserved
| KERNEL: system 00:00: iomem range 0xe0000-0xfffff could not be reserved
| KERNEL: system 00:00: iomem range 0x100000-0xdffffff could not be reserved
| KERNEL: system 00:08: ioport range 0x370-0x371 has been reserved
| KERNEL: system 00:08: ioport range 0x40b-0x40b has been reserved
| KERNEL: system 00:08: ioport range 0x480-0x48f has been reserved
| KERNEL: system 00:08: ioport range 0x4d0-0x4d1 has been reserved
| KERNEL: system 00:08: ioport range 0x4d6-0x4d6 has been reserved
| KERNEL: system 00:08: ioport range 0x1400-0x141f has been reserved
| KERNEL: system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
| KERNEL: system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
| KERNEL: system 00:09: ioport range 0x1000-0x107f could not be reserved
| KERNEL: system 00:09: ioport range 0x1100-0x111f has been reserved
| KERNEL: system 00:09: iomem range 0x98480000-0x98480fff has been reserved
| KERNEL: system 00:0a: iomem range 0xcf000-0xcffff has been reserved
| KERNEL: system 00:0a: iomem range 0xd3000-0xd3fff has been reserved
| KERNEL: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
| KERNEL: pci 0000:00:01.0:   IO window: 0x2000-0x2fff
| KERNEL: pci 0000:00:01.0:   MEM window: 0x90000000-0x900fffff
| KERNEL: pci 0000:00:01.0:   PREFETCH window: 0x00000094000000-0x00000097ffffff
| KERNEL: pci 0000:00:0b.0: CardBus bridge, secondary bus 0000:02
| KERNEL: pci 0000:00:0b.0:   IO window: 0x001800-0x0018ff
| KERNEL: pci 0000:00:0b.0:   IO window: 0x001c00-0x001cff
| KERNEL: pci 0000:00:0b.0:   PREFETCH window: 0x10000000-0x13ffffff
| KERNEL: pci 0000:00:0b.0:   MEM window: 0x14000000-0x17ffffff
| KERNEL: ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
| KERNEL: PCI: setting IRQ 11 as level-triggered
| KERNEL: pci 0000:00:0b.0: PCI INT A -> Link[C0C6] -> GSI 11 (level, low) -> IRQ 11
| KERNEL: bus: 00 index 0 io port: [0x00-0xffff]
| KERNEL: bus: 00 index 1 mmio: [0x000000-0xffffffff]
| KERNEL: bus: 01 index 0 io port: [0x2000-0x2fff]
| KERNEL: bus: 01 index 1 mmio: [0x90000000-0x900fffff]
| KERNEL: bus: 01 index 2 mmio: [0x94000000-0x97ffffff]
| KERNEL: bus: 01 index 3 mmio: [0x0-0x0]
| KERNEL: bus: 02 index 0 io port: [0x1800-0x18ff]
| KERNEL: bus: 02 index 1 io port: [0x1c00-0x1cff]
| KERNEL: bus: 02 index 2 mmio: [0x10000000-0x13ffffff]
| KERNEL: bus: 02 index 3 mmio: [0x14000000-0x17ffffff]
| KERNEL: NET: Registered protocol family 2
| KERNEL: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
| KERNEL: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
| KERNEL: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
| KERNEL: TCP: Hash tables configured (established 8192 bind 8192)
| KERNEL: TCP reno registered
| KERNEL: NET: Registered protocol family 1
| KERNEL: Freeing initrd memory: 1752k freed
| KERNEL: msgmni has been set to 437
| KERNEL: io scheduler noop registered
| KERNEL: io scheduler deadline registered (default)
| KERNEL: pci 0000:00:07.0: Activating ISA DMA hang workarounds
| KERNEL: pci 0000:01:05.0: Boot video device
| KERNEL: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
| KERNEL: ACPI: Power Button (FF) [PWRF]
| KERNEL: input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
| KERNEL: ACPI: Sleep Button (CM) [C13B]
| KERNEL: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
| KERNEL: ACPI: Lid Switch [C13A]
| KERNEL: ACPI: Invalid PBLK length [7]
| KERNEL: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
| KERNEL: processor ACPI_CPU:00: registered as cooling_device0
| KERNEL: brd: module loaded
| KERNEL: PNP: PS/2 Controller [PNP0303:C177,PNP0f13:C178] at 0x60,0x64 irq 1,12
| KERNEL: i8042.c: Detected active multiplexing controller, rev 1.1.
| KERNEL: serio: i8042 KBD port at 0x60,0x64 irq 1
| KERNEL: serio: i8042 AUX0 port at 0x60,0x64 irq 12
| KERNEL: serio: i8042 AUX1 port at 0x60,0x64 irq 12
| KERNEL: serio: i8042 AUX2 port at 0x60,0x64 irq 12
| KERNEL: serio: i8042 AUX3 port at 0x60,0x64 irq 12
| KERNEL: mice: PS/2 mouse device common for all mice
| KERNEL: input: PC Speaker as /devices/platform/pcspkr/input/input3
| KERNEL: TCP cubic registered
| KERNEL: NET: Registered protocol family 17
| KERNEL: IO APIC resources could be not be allocated.
| KERNEL: Using IPI Shortcut mode
| KERNEL: Marking TSC unstable due to possible TSC halt in C2
| KERNEL: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
| KERNEL: RAMDISK: cramfs filesystem found at block 0
| KERNEL: RAMDISK: Loading 1752KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
| KERNEL: VFS: Mounted root (cramfs filesystem) readonly.
| KERNEL: Freeing unused kernel memory: 248k freed
| pfac: Ok, PID 300.
| initrd: WTware PRO shell, v.4.5.24
| initrd: Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| .
| initrd: Ethernet boot.
| initrd: Kernel: 2.6.28, modules in /lib/modules/2.6.28.
| initrd: PCIID: 1002:cbb2 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1002:7010 sub 0000:0000, class 0x0604.
| initrd: PCIID: 10b9:5451 sub 0e11:005a, class 0x0401.
| initrd: PCIID: 10b9:1533 sub 0e11:005a, class 0x0601.
| initrd: PCIID: 10b9:5457 sub 0e11:005a, class 0x0703.
| initrd: PCIID: 168c:0013 sub 0e11:00e5, class 0x0200.
| initrd: PCIID: 1217:7114 sub 0e11:005a, class 0x0607.
| initrd: PCIID: 1217:7110 sub 0e11:005a, class 0x0880.
| initrd: PCIID: 10b9:5229 sub 0e11:005a, class 0x0101.
| initrd: PCIID: 10b9:7101 sub 0e11:005a, class 0x0680.
| initrd: PCIID: 1033:0035 sub 0e11:005a, class 0x0c03.
| initrd: PCIID: 1033:0035 sub 0e11:005a, class 0x0c03.
| initrd: PCIID: 1033:00e0 sub 0e11:005a, class 0x0c03.
| initrd: PCIID: 14e4:165d sub 0e11:005a, class 0x0200.
| initrd: PCIID: 1002:4337 sub 0e11:005a, class 0x0300.
| initrd: PCIID, network: 168c:0013.
| initrd: PCIID, second network: 14e4:165d.
| initrd: PCIID, VGA: 1002:4337.
| initrd: PCIID, sound: 10b9:5451.
| initrd: RAM: 224408Kb total, 210724Kb free.
| initrd: Force USB hub driver.
| initrd: Loading usb bus driver.
| initrd: +--- Executing "/sbin/insmod usbcore"
| KERNEL: usbcore: registered new interface driver usbfs
| KERNEL: usbcore: registered new interface driver hub
| KERNEL: usbcore: registered new device driver usb
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod ehci-hcd"
| KERNEL: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
| KERNEL: ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
| KERNEL: PCI: setting IRQ 10 as level-triggered
| KERNEL: ehci_hcd 0000:00:12.2: PCI INT C -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
| KERNEL: ehci_hcd 0000:00:12.2: EHCI Host Controller
| KERNEL: ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
| KERNEL: ehci_hcd 0000:00:12.2: irq 10, io mem 0x98400000
| KERNEL: ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
| KERNEL: usb usb1: configuration #1 chosen from 1 choice
| KERNEL: hub 1-0:1.0: USB hub found
| KERNEL: hub 1-0:1.0: 5 ports detected
| KERNEL: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
| KERNEL: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| KERNEL: usb usb1: Product: EHCI Host Controller
| KERNEL: usb usb1: Manufacturer: Linux 2.6.28 ehci_hcd
| KERNEL: usb usb1: SerialNumber: 0000:00:12.2
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod uhci-hcd"
| KERNEL: uhci_hcd: USB Universal Host Controller Interface driver
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.6.28/kernel/drivers/usb/host/uhci-hcd.ko
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod ohci-hcd"
| KERNEL: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
| KERNEL: ohci_hcd 0000:00:12.0: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
| KERNEL: ohci_hcd 0000:00:12.0: OHCI Host Controller
| KERNEL: ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
| KERNEL: ohci_hcd 0000:00:12.0: irq 10, io mem 0x98300000
| KERNEL: usb usb2: configuration #1 chosen from 1 choice
| KERNEL: hub 2-0:1.0: USB hub found
| KERNEL: hub 2-0:1.0: 3 ports detected
| KERNEL: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
| KERNEL: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| KERNEL: usb usb2: Product: OHCI Host Controller
| KERNEL: usb usb2: Manufacturer: Linux 2.6.28 ohci_hcd
| KERNEL: usb usb2: SerialNumber: 0000:00:12.0
| KERNEL: ohci_hcd 0000:00:12.1: PCI INT B -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
| KERNEL: ohci_hcd 0000:00:12.1: OHCI Host Controller
| KERNEL: ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
| KERNEL: ohci_hcd 0000:00:12.1: irq 10, io mem 0x98380000
| KERNEL: usb usb3: configuration #1 chosen from 1 choice
| KERNEL: hub 3-0:1.0: USB hub found
| KERNEL: hub 3-0:1.0: 2 ports detected
| KERNEL: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
| KERNEL: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| KERNEL: usb usb3: Product: OHCI Host Controller
| KERNEL: usb usb3: Manufacturer: Linux 2.6.28 ohci_hcd
| KERNEL: usb usb3: SerialNumber: 0000:00:12.1
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| KERNEL: usb 1-3: new high speed USB device using ehci_hcd and address 2
| KERNEL: usb 1-3: configuration #1 chosen from 1 choice
| KERNEL: usb 1-3: New USB device found, idVendor=03f0, idProduct=3b17
| KERNEL: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
| KERNEL: usb 1-3: Product: HP LaserJet M1005
| KERNEL: usb 1-3: Manufacturer: Hewlett-Packard
| KERNEL: usb 1-3: SerialNumber: KJ1BJW9
| KERNEL: Clocksource tsc unstable (delta = -197574283 ns)
| +--- FILE "/proc/bus/usb/devices" -----------------------
| | T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
| | B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0001 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.28 ohci_hcd
| | S:  Product=OHCI Host Controller
| | S:  SerialNumber=0000:00:12.1
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| | T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
| | B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0001 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.28 ohci_hcd
| | S:  Product=OHCI Host Controller
| | S:  SerialNumber=0000:00:12.0
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| | T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 5
| | B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0002 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.28 ehci_hcd
| | S:  Product=EHCI Host Controller
| | S:  SerialNumber=0000:00:12.2
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
| | T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
| | D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=03f0 ProdID=3b17 Rev= 1.00
| | S:  Manufacturer=Hewlett-Packard
| | S:  Product=HP LaserJet M1005
| | S:  SerialNumber=KJ1BJW9
| | C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 98mA
| | I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
| | E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| | E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| | E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=64ms
| | I:* If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
| | E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| | E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| +----------------------------------------------------
| initrd: Loading ethernet drivers.
| initrd: +--- Executing "/sbin/modprobe tg3"
| KERNEL: tg3.c:v3.94 (August 14, 2008)
| KERNEL: ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
| KERNEL: tg3 0000:00:13.0: PCI INT A -> Link[C0C8] -> GSI 10 (level, low) -> IRQ 10
| KERNEL: eth0: Tigon3 [partno(BCM5705mA1) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:d7:d0:84
| KERNEL: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
| KERNEL: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: NIC module tg3.ko loaded.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0"
| dhcpCB: DHCP command: deconfig.
| KERNEL: tg3: eth0: Link is up at 100 Mbps, full duplex.
| KERNEL: tg3: eth0: Flow control is on for TX and on for RX.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 192.168.0.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 192.168.0.127.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: TFTP server: 192.168.0.1.
| dhcpCB: Boot file: "PRO\4.5.24\pxelinux.0".
| dhcpCB: TFTP prefix: "PRO\4.5.24/".
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: Trying to download file "PRO\4.5.24/configs/list.wtc" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "PRO\4.5.24/configs/00.08.02.D7.D0.84.wtc" from TFTP server "192.168.0.1".
| initrd: Trying to download file "PRO\4.5.24/configs/all.wtc" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "PRO\4.5.24/all.wtc" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "PRO\all.wtc" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "all.wtc" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "PRO\4.5.24/configs/common.wtc" from TFTP server "192.168.0.1".
| initrd: Trying to download file "wtware.lic" from TFTP server "192.168.0.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "PRO\4.5.24/wtware.lic" from TFTP server "192.168.0.1".
| initrd: WHOLE CONFIG FILE:
| +--- FILE "/tmp/cfg" -----------------------
| | keyboard = ru
| | numlock = off
| | turnoffmenu = always
| | mouse_accel_mult = 1.5
| | domain=tdmolis
| | mouse_wheel = on
| | video = VESA(S)
| | resolution = 1024x768
| | bpp = 16
| | # 
| | include common.wtc
| | clienthostname = notebook
| | win2kIP = 192.168.0.5
| | user=dep
| | password=
| | printer=usb
| | scanner = on
| | syslog = 192.168.0.99
| | #
| | #    DOS-.  
| | #   Notepad    " > "
| | #  "Terminal".
| | #
| | #
| | #   䠩 ᪫뢠 業  ନ. 
| | # 業 室 㯠  죨, ஡ :
| | #
| | # http://wtware.ru/buy.html
| | #
| | #
| | # 業  ஢,  ࠭祭  ६,
| | #  ᯫ⭮ ,  :
| | #
| | # http://wtware.ru/download.html
| | #
| | #
| | # 業 WTware ⮨   ப,  㦭 
| | #  ७   䠩. ஡  業
| | # ⠩ :
| | #
| | # http://wtware.ru/licensing/terms.html
| | #
| +----------------------------------------------------
| initrd: Read config file.
| initrd: Found parameter "keyboard" with value = "ru".
| initrd: Found parameter "numlock" with value = "off".
| initrd: Found parameter "turnoffmenu" with value = "always".
| initrd: Found parameter "mouse_accel_mult" with value = "1.5".
| initrd: Found parameter "domain" with value = "tdmolis".
| initrd: Found parameter "mouse_wheel" with value = "on".
| initrd: Found parameter "video" with value = "VESA(S)".
| initrd: Found parameter "resolution" with value = "1024x768".
| initrd: Found parameter "bpp" with value = "16".
| initrd: Found parameter "clienthostname" with value = "notebook".
| initrd: Found parameter "win2kIP" with value = "192.168.0.5".
| initrd: Found parameter "user" with value = "dep".
| initrd: Found parameter "password" with value.
| initrd: Found parameter "printer" with value = "usb".
| initrd: Found parameter "scanner" with value = "on".
| initrd: Found parameter "syslog" with value = "192.168.0.99".
| initrd: Use DOS (alt, 866) codepage for config file.
| initrd: Hostname: "notebook".
| initrd: User [dep], display_name [], domain [tdmolis], password empty.
| initrd: Using video driver Universal driver (no refresh rates).
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0 --hostname=notebook --request=192.168.0.127"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 192.168.0.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 192.168.0.127.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: TFTP server: 192.168.0.1.
| dhcpCB: Boot file: "PRO\4.5.24\pxelinux.0".
| dhcpCB: TFTP prefix: "PRO\4.5.24/".
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| Got config from initrd.
+----------------------------------------------------
Saned listener active.
initrd: Trying to download file "PRO\4.5.24/packages/wtpprint.pkg" from TFTP server "192.168.0.1".
initrd: Loading usb printer driver.
initrd: +--- Executing "/sbin/insmod usblp"
KERNEL: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B17
KERNEL: usbcore: registered new interface driver usblp
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading PS/2 mouse driver.
initrd: +--- Executing "/sbin/insmod psmouse"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.28/kernel/drivers/input/mouse/psmouse.ko
initrd: +------------------------
initrd: Trying to download file "PRO\4.5.24/packages/wtps.pkg" from TFTP server "192.168.0.1".
KERNEL: Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
KERNEL: serio: Synaptics pass-through port at isa0060/serio4/input0
KERNEL: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
initrd: Trying to download file "PRO\4.5.24/packages/wtpscan.pkg" from TFTP server "192.168.0.1".
initrd: Trying to download file "PRO\4.5.24/graphic/menu.gif" from TFTP server "192.168.0.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "PRO\4.5.24/graphic/pleasewait.gif" from TFTP server "192.168.0.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "PRO\4.5.24/graphic/popup.gif" from TFTP server "192.168.0.1".
pfac: Got command line /sbin/printer 0.
initrd: Error code 1: File not found..
init: WTware PRO second shell, v.4.5.24
printer: Printserver, WTware PRO v.4.5.24
printer: Printserver 0, device /dev/lpUSB0, listen at port 9100.
pfac: Ok, PID 385.
init: New mode: 1024x768, 16 bit, -1 Hz, modeline "".
+--- FILE "/etc/libvga.config" -----------------------
| mouse_accel_type power
| mouse_accel_thresh 4
| mouse_accel_power 0.8
| mouse_accel_offset 2
| mouse_wheel_steps 18
| HorizSync 31.5 200
| VertRefresh 50 140
| mouse IMPS2
| mdev /dev/input/mice
| mouse_accel_mult 1.500000
| chipset VESA
+----------------------------------------------------
init: Allocate 1572864 bytes of shared memory for backscreen, 801 bytes for dirty buffer.
init: Backscreen shared mem Id 00000000.
init: Dirty buffer shared mem Id 00008001.
init: Shared memory for backscreen b5ded000.
init: Shared memory for dirty buffer b5dec000.
init: Total free ram: 208412 KB.
init: Bitmap cache sizes:  base number: 1729.
init: Free ram after buffers allocation: 176432 KB.
init: Free ram just before session: 179252 Kb.
init: RDP: connecting to "192.168.0.5":3389
init: 192.168.0.5 => 192.168.0.5.
init: Kernel default buffer 87380 bytes.
init: TCP/IP connection with 192.168.0.5:3389 established
init: Make RDP session
init:  username "dep"
init:  password empty
init:  domain "tdmolis"
init:  shell ""
init:  directory ""
init:  video 1024x768@16
init:  pflags 0000006F
init:  keyboard 00000419:00000000
init:  hostname "notebook"
init:  ipaddr "192.168.0.127"
init: RDP5 encryption (X.509).
init: RC4 key 128 bit.
init: Iteration, free RAM 179132 Kb
KERNEL: input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input6
